Your cart is currently empty.
MCSADVENTURES Rocker turn signal kit
Rocker switch snaps into .83 X 1.48 cutout
Plug and Play utilizing factory brake lights
Fits many Polaris 19+ Ranger 1000 non ride command and all year General models WITH the 4 pin plug
*****This kit only fits machines with the 4 pin bed to chassis plug*****
Extended length harness fits 2 and 4 seat models
Includes Pulse bar harness for newer 2019+ machines.
!!Must have the 4 pin plug shown in picture on top of engine under the bed!!
This is the center connection where both left and right tail lights come together near center of the rear frame area of machine. NOT THE PLUG AT THE ACTUAL TAIL LIGHTS!
*****check your machine to verify fitment by looking for the bed-to-frame tail light harness plug located near the top rear frame on top of the engine underneath the bed*****
Looking for a true plug and play way to add turn signals to your Ranger or General that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
MADE IN USA
Kit is comprised of a main control module harness with front turn signal wires. This main control module mates to our custom rear T harness to utilize the oem brake lights as turn signals.
Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with wires and QD connectors.
Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
Includes optional instrument cluster integration for machines with the instrument cluster shown.
A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Front indicators (2 per side) mount into a 3/4" diameter hole to provide a clean oem appearance.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.
All plug and play. Everything plugs together.
Only 3 connections to the vehicle: 12v+ batt 12v+ keyed (ignition) 12v- (ground)
Fits many 19+ Polaris Ranger 1000 (non ride command) and all year General with 4 pin tail light bed plug. Extended harness fits both 2 and 4 seat units This kit ONLY fits machines with the 4 pin plug!
Check bed-to-frame plug at top rear of frame under the bed to verify fitment.
On Ranger and General models, lift bed to examine top rear driver side frame area. A pulse harness is also included for easy installation on newer machines with the pulse power bar.
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness utilizes the rear brake lights as turn signals feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module.
Copyright © 2000-2021 Advance MCS Electronics - All Rights Reserved
Developed by iTiSdESign Site Map