Your cart is currently empty.
MCSADVENTURES Rocker turn signal kit
Fits 2019+ Polaris RZR 900s, 1000s, xp1000, xp Turbo, Turbo S, Pro XP
Fits 2018+ Ranger 1000, 1000xp (all trim levels including ride command)
Rocker switch snaps into .83 X 1.48 cutout
Plug and Play utilizing factory brake lights
Custom rear T harness plugs into the left and right tail light harness
Extended length harness fits 2 and 4 seat models
Includes Pulse bar harness for newer 2019+ machines.
Looking for a true plug and play way to add turn signals to your 2019+ RZR or Ranger 1000 that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
MADE IN USA
Kit is comprised of a complete switch/control module front harness which connects to a rear T harness.
Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fumbling with qd terminals.
Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
Includes optional instrument cluster integration for machines with the instrument cluster shown.
A custom rear T harness plugs into the left and right factory tail lights and converts the factory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Front indicators (2 per side) mount into a 3/4" diameter hole to provide a clean oem appearance.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.
All plug and play. Everything plugs together.
Only 3 connections to the vehicle: 12v+ batt 12v+ keyed (ignition) 12v- (ground)
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module
A complete front end harness with sealed LED lights feeds through firewall into dash and also plugs into the control module.
For power only 3 connections to the machine are required: 12v+ batt 12v+ keyed ignition 12v-ground
A pulse power harness is included for machines with the pulse power bar.
Total install time: approx 1 hour
Copyright © 2000-2021 Advance MCS Electronics - All Rights Reserved
Developed by iTiSdESign Site Map