Your cart is currently empty.
MCSADVENTURES OEM sized Rocker turn signal & horn kit
Utilizing Genuine Carling OEM matching rocker switches
(snaps directly into Polaris Ranger OEM switch holes)
Fits 2018+ Ranger 1000 (all trim levels including ride command)
Plug and Play utilizing factory brake lights
Custom rear T harness plugs into the left and right tail light harness
Extended length harness fits 2 and 4 seat models
Ships with power harness prewired ready to plug into Polaris Pulse Bar
Looking for a true plug and play way to add turn signals to your 2018+ RZR or Ranger 1000 that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
This kit was created out of a need. Late model Polaris Rangers utilize a totally different rocker switch than the majority of aftermarket rockers available. If you have a late model Polaris Ranger (2018 and up specifically) and have punched the OEM rocker switch holes out or have a unit that someone else punched the holes out already......well, you aren't going to fit standard aftermarket switches into that hole as the switch will simply flop around or disappear into your dash when you attempt to snap it into place. Solution? This kit utilizes matching OEM size rocker switches. As such, these switches easily snap into any of your OEM rocker switch knockouts located in the center dash or to the left of the steering wheel.
MADE IN USA
Kit is comprised of a complete switch/control module front harness which connects to a rear T harness.
Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fumbling with qd terminals.
Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
Includes optional instrument cluster integration for machines with the instrument cluster shown.
A custom rear T harness plugs into the left and right factory tail lights and converts the factory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Front indicators (2 per side) mount into a 3/4" diameter hole to provide a clean oem appearance.
Also included is a complete matching hazard/horn combo kit. This reduces clutter on your dash while still giving you all the bells and whistles. Prewired harness simply plugs into the main turn signal harness. A loud true automotive horn is included. This isn't your toy scooter horn you hear from the moped next door. Folks this horn will wake up your neighbors!
All plug and play. Everything literally plugs together. Kit ships with a pre attached Power plug compatible with Polaris Pulse Bar system so it's ready to litterally plug into your machine and power up.
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module
A complete front end harness with sealed LED lights feeds through firewall into dash and also plugs into the control module.
Ships with power plug pre-installed ready to plug into the OEM Polaris Pulse Bar.
Total install time: approx 1 hour
Copyright © 2000-2021 Advance MCS Electronics - All Rights Reserved
Developed by iTiSdESign Site Map